← Rubio, Marco

Notice of Acceptance — Sunshine Windows Manufacturing, Inc., NOA 99-0314.02 (2007)

6060 SW 13 Clients Ferro Miami-Dade County Building Department Rubio Lobbyist Documents

Open / download PDF

Document text

Page 1
MIAMI-DADE COUNTY, FLORIDA RE-EXAMINE FLAGLER BUILDING 14900 WEST FLAGLER STREET SUITE 1800 MIAMI, FLORIDA 33176 (305) 371-5901 FAX (305) 371-5399 NOTICE OF ACCEPTANCE (NOA) Sunshine Windows Manufacturing, Inc. 1745 W. 12th St. Fort Lauderdale, FL 33312 Scope: This NOA is being issued under the applicable rules and regulations governing the use of construction materials and is within the scope of Evaluation Report (ER) No. 1603 issued by Miami-Dade County Product Control Division. This NOA is being issued under the applicable rules and regulations governing the use of construction materials and is within the scope of Evaluation Report (ER) No. 1603 issued by Miami-Dade County Product Control Division. This NOA shall not be valid under the AHJ (in areas other than Miami-Dade County, FL and/or Palm Beach County, FL) unless accepted by the Authority Having Jurisdiction (AHJ). The acceptance of this product or material is for quality assurance purposes. The manufacturer fails to perform in the accepted manner, the use of such product or material within their jurisdiction, the AHJ may immediately revoke this acceptance. If it is determined by Miami-Dade County Product Control Division that this product or material fails to meet the requirements of the applicable building code. This product is approved as noted herein, and has been designed to comply with the High Velocity Hurricane Zone in accordance with the Florida Building Code. DESCRIPTION: Clipped Aluminum "Trade Mullions" (Note: referenced) APPROVAL DOCUMENT: Drawing No. 3055-12, dated 04/25/2007, Windows (2009), sheet 1 of 1, prepared, signed and issued by the Miami-Dade County Product Control Division, and Drawing No. 3055-12, dated 11/7/1978, bearing the Miami-Dade County Product Control Division. MISSILE IMPACT RATING: None LABELING: Each unit shall be marked with the manufacturer's name or logo, city, state and label number. The label shall be permanent. "Miami-Dade County Product Control Approval", and the model number. The label shall be permanent. "Miami-Dade County Product Control Approval", and the model number. The label shall be permanent. "Miami-Dade County Product Control Approval", and the model number. RENEWAL of this NOA shall be considered after re-evaluation of this product. CHANGE IN THE APPROVAL OF THIS NOA will occur after the expiration date or if there has been a significant change in the product, use and/or manufacture of this product or shall automatically terminate this NOA. Failure to comply with the applicable building code, or any laws, rules, or regulations applicable to the product, for which this NOA shall be cause for termination and renewal of NOA. ADVERTISMENT: The NOA number preceded by the words "Miami-Dade County, Florida, and followed by the expiration date may be displayed in advertising literature. INSPECTION: A copy of this entire NOA shall be provided to the owner, the manufacturer or its distributor and shall be available for inspection at the job site at the request of the Building Official. This NOA serves NOA # 99-0314.02 and consists of 1 page, as well as approval document mentioned above. The submitted documentation was reviewed by David F. Figueiredo. Approved Master Agent: 7/24/2007 Page 1 NOA-14-0724.0724.06 27