Product Acceptance — Atlas Roofing, Inc., NOA 04-0426.04 (2004)

ROOFING ASSEMBLY APPROVAL Category: Roofing Sub-Category: Roofing Tiles Markets: City 1. SCOPE This new roofing design using Velcro by Atlas Roofing, Inc. "The Roof Tile" as manufactured by Atlas Roofing, Inc. is intended for use in high wind regions of acceptance. For locations where the city has requirements, as determined by applicable building code, where the wind speed is 110 mph or greater, this system shall be used. The wind resistance of this system is determined by the values listed in previous values obtained by manufacturer's testing. The system shall be done as a normal based system. section 4 herein. The installation calculation shall be done as a normal based system. 2. PRODUCT DESCRIPTION Manufactured By | Product Description | Test Specifications | Product Description --- | --- | --- | --- Noblesville, IN | Product: 18.5" | ASTM C 1167 | High profile, one-piece, 12 shaped single nail Sparrows | Length: 10 | | For flat deck installation, concrete set, or N' City | Width: 10 | | adhesive set applications. Roof Tile | varying thickness | | Trim Pieces | Length: varies | PA 112 | Accessory tabs, clay roof pieces for accent | Width: varies | | and accent pieces for flat deck installation. | varying thickness | | Manufactured for each tile profile. 2.1 SUBMITTED EVIDENCE: Test Name: | Test Identifier | Test Number/Result | Date --- | --- | --- | --- BIA Concrete, Inc. | 1397-59 | ASTM C 1167 | 04/27/04 PRI Asphalt Technologies, Inc. | PD-002-02-01 | TAS 101 | 10/28/02 PRI Asphalt Technologies, Inc. | PT-010-02-01 | TAS 101 | 10/28/02 PRI Asphalt Technologies, Inc. | 99-0041 NTRMA High | Miami-Dade NOA | 1999 3. LIMITATIONS 3.1 Fire classification is not part of this assessment. 3.2 This system is intended for use on concrete or asphalt, a side field split, test maybe performed in accordance with RAS 106. 3.3 Applicant shall retain the services of a Miami-Dade County Certified Laboratory to perform the Building Code Compliance Office-For review. 3.4 This system is intended for use in compliance with the applicable Roofing Applications Standard listed section 4 herein. 3.5 3000 lb impact and hydrostatic applications shall be installed perpendicular to the roof slope. 3.6 This acceptance is for wood deck applications. Minimum deck requirements shall be in compliance with applicable building code. NOA No.: 04-0426.04 Expiration Date: 08/25/09 Approved Date: 08/25/04 Page 2 of 6 H001571 1002 05:39 2-4 5658-98 2