Spreader Bar Installation and Safety Instructions

4 WARNING: Use and install cables, spreader bars, and rigging hardware in accordance with the load ratings of the rated equipment. MECHANICAL INSTRUCTIONS The spreader bar should be connected to the main top shroud with a deesing strap, shackle, pin, or turnbuckle. The spreader bar should be connected to the main top shroud with a deesing strap, shackle, pin, or turnbuckle. The spreader bar should be connected to the main top shroud with a deesing strap, shackle, pin, or turnbuckle. Top Line Spreaders Bar Tool Bit Approximately 50 to 60 degrees Less than or equal to 60 Two sections less than 60 Approximately 50 to 60 degrees Less than or equal to 60 Top Line Spreaders Bar Tool Bit Approximately 50 to 60 degrees Less than or equal to 60 Two sections less than 60 Approximately 50 to 60 degrees Less than or equal to 60 Top Line Spreaders Bar Tool Bit Approximately 50 to 60 degrees Less than or equal to 60 Two sections less than 60 Approximately 50 to 60 degrees Less than or equal to 60 WARNING: Do not use the spreader bar if the spreader bar is damaged or if the spreader bar is not rated for the load. GROUND BRACING (BUILDING INTERIOR) WARNING: Do not use the spreader bar if the spreader bar is damaged or if the spreader bar is not rated for the load. GROUND BRACING (BUILDING EXTERIOR) WARNING: Do not use the spreader bar if the spreader bar is damaged or if the spreader bar is not rated for the load. CAUTION: Ground bracing required for all installations. Frame 2